Huangdao District, Qingdao, China
Pig houses

Pig house ventilation and climate control, zone by zone.

Farrowing, nursery and finishing areas have different temperature and ventilation needs. HMY supplies a multi-zone controller and the fans, cooling, inlets, feeding and heating around it, with the fan count and layout calculated for your building.

Farrowing / nursery / finishingMulti-zone control50 / 60 Hz
Pig house illustration
Zones and stages

Different rooms, different settings.

One controller can hold separate temperature and ventilation settings for each zone.

Farrowing

Local heating for the litter and minimum ventilation for the sow, held as separate zones.

Nursery

Warmer set points and staged ventilation for young pigs, with alarms watching temperature and power.

Finishing

Higher air exchange and cooling for heavier pigs, with fan and inlet stages matched to the house.

Multi-zone control

Separate temperature and humidity inputs, fan groups and heater groups for each room or zone.

Complete house

What goes into a pig house.

Every category below is selected against the same controller and the same room conditions.

Controller and sensors

Multi-zone temperature and humidity inputs, fan and heater stages, alarms and optional remote monitoring.

Exhaust fans

Push-pull or double-door cone fans for minimum and maximum ventilation.

Cooling pads

Paper or plastic evaporative pads for hot periods, matched to the house and water supply.

Air inlets

Side-wall, ceiling, deflector and louver inlets for controlled air distribution.

Feed silos and feeding

Galvanized silos and feed lines sized to the number of pigs and the room layout.

Water lines

Pressure regulators, main pipe, nipple drinkers and flushing components.

Heating

Hot-air heaters or heat exchanger radiators for farrowing, nursery and cold periods.

Alarms and accessories

Alarm outputs, push-pull rods, gearboxes and motors matched to the fans and controller.

Fan count and layout

How we size the ventilation.

We work from the rooms, the pigs and the local climate, not from a standard fan count.

House and room layout

Length, width and height of each room, the number of zones and the pen layout.

Pig number and weight

Number of pigs per room and the target weight at each stage.

Target climate

Target temperature for each stage and the local summer and winter conditions.

Power and equipment

50 Hz or 60 Hz, available voltage, and any existing controller, fans or inlets you want to keep.

We return a recommended fan count, fan positions and zone settings. Final installation and local code compliance remain with your installer.
Selection

Common questions.

Can one controller manage several rooms?

Multi-zone controller models can manage separate temperature and ventilation zones. Send the room layout, the number of zones and the equipment in each one, and we will confirm the model and inputs.

Can you supply cooling for a hot climate?

Yes. We select the fan and cooling pad combination from the house dimensions, the number and weight of pigs, the target temperature and the local summer conditions.

Can you match equipment I already have?

Send the models and photos of the existing controller, fans and inlets. We will check what can be reused and recommend the parts that need to change.

Send the room layout.

Tell us the rooms, the number and weight of the pigs, and the local climate. We will recommend the controller, fan count and equipment list.